JLR BCM Module HPLA-14F041-BH – Virginized EEPROM, Ready to Program

Replace a faulty Body Control Module with confidence using this JLR BCM HPLA-14F041-BH, sold in a fully virginized state. You receive a genuine OEM‑spec unit that we have cleared, reset, and tested—eliminating the need for risky donor modules or expensive new parts from a main dealer. Simply install the module, connect your diagnostic tool, and program the BCM to your specific vehicle in one straight‑forward session.

What “Virginized EEPROM” Means for Your Workshop

The module’s EEPROM holds the vehicle‑specific configuration, immobiliser data, and VIN. A used, un‑cleared BCM often causes programming failures or security lock‑outs. Our virginization process writes completely fresh factory data to the EEPROM, returning the module to the same condition as a brand‑new unit. You experience zero donor‑car conflicts and a flawless first‑time programming rate.

Key Features of the HPLA-14F041-BH BCM

• Genuine OEM Hardware: Original equipment part number HPLA-14F041-BH, built to exact JLR specifications.
• Professionally Virginized EEPROM: The internal memory carries factory‑clean data; no old VIN, no immobiliser handshake, no stored fault codes.
• Plug‑and‑Program Ready: Mount the BCM in the vehicle, then use SDD, Pathfinder, or a compatible third‑party JLR tool to configure it in approximately 15 minutes.
• Extensively Tested: Every unit passes a full post‑virginization bench test to guarantee communication with the vehicle’s network before shipping.
• Direct Form, Fit, and Function: The connectors and bracket match the original location perfectly; no modifications or wiring changes are required.
• Fast, Trackable Shipping: We dispatch each module with protective packaging so it arrives ready for immediate installation.

Coverage – Jaguar Land Rover Models This BCM Fits

The HPLA-14F041-BH Body Control Module fits multiple high‑end JLR platforms. Always verify the part number against your existing module, but the most common applications include:

• Range Rover L405 (2013 – 2022)
• Range Rover Sport L494 (2014 – 2022)
• Range Rover L460 (2022 – 2024+) – select trims
• Range Rover Sport L461 (2023+) – depending on specification
• Certain Jaguar XJ and XF models sharing the same platform architecture

If you see HPLA-14F041-BH (or a superseded number) on your original unit, this virginized module directly replaces it without extra cross‑referencing.

How You Program the BCM After Installation

1. Physically Install the Module: Remove the old BCM from behind the glove box or from the passenger footwell, disconnect the harness plugs, and secure the new virginized BCM in the same position.
2. Connect Your Diagnostic Interface: Launch your JLR‑approved software (JLR SDD, Pathfinder, or equivalent) and connect via J2534 or factory VCI.
3. Run the “Replace BCM” Routine: Follow the guided procedure. The diagnostic tool reads the vehicle’s central configuration and writes the VIN, immobiliser data, and feature coding to the virginized module.
4. Perform Key Synchronisation: Re‑learn the existing keys to the new BCM. The tool walks you through this step; the virgin state accepts the synchronisation without resistance.
5. Clear DTCs and Verify: After programming, clear any residual communication faults, test all body functions, and return the vehicle to your customer.

Why a Virginized BCM Saves You Time and Money

Searching for a used, un‑cleared BCM puts your project at risk of mismatched security data, corrupted EEPROMs, and repeated programming failures. Our virginized solution removes those risks entirely. You pay a single, competitive price, install the unit, and program it right the first time. Your workshop avoids wasted diagnostic hours, customer frustration, and the extra cost of main‑dealer parts. Every module ships with a comprehensive 12‑month warranty that covers any electronic defect—giving you complete peace of mind.

Order Your JLR BCM HPLA-14F041-BH Virginized EEPROM Today

Stock is limited and demand for this popular module remains high. Order directly from this page and receive fast dispatch with full tracking information. Equip your next JLR BCM replacement job with the right part from the start—choose a virginized unit that works every time.

Buy Now – Get a Virginized BCM Fast

Compatible with JLR diagnostic software. Module requires programming to your specific VIN. Sold as a cleared, ready‑to‑program unit; diagnostic tools and key programming steps are the installer’s responsibility.