JLR BCM Module DK62-14F041-AC Virginized EEPROM

Product Overview

Our virginized BCM part DK62-14F041-AC gives you a genuine, factory-reset body control module that eliminates the biggest headache of used module replacement: locked immobilizer data. When a JLR vehicle experiences BCM failure, the repair path becomes tricky. A junkyard module still holds the original vehicle’s VIN, keys, and configuration. Those mismatches prevent the diagnostic software from completing the programming routine. Our expert team solves that by thoroughly erasing the EEPROM and verifying every memory cell returns to its factory default value. You just plug it in, follow the guided programming steps, and a fully personalised module boots up with your vehicle’s identity.

The Importance of Virginization

Body control modules in modern JLR vehicles act as the hub for security, lighting, wipers, and many convenience functions. They store a secure token that the immobilizer and engine ECU use to permit starting. Simply swapping in a used module causes a VIN mismatch, and the car refuses to start or displays permanent fault codes. Attempting to edit the EEPROM dump manually introduces risks of checksum errors and bricked modules. By choosing our virginized DK62-14F041-AC, you bypass all of that. The blank module prompts the diagnostic tool to load the correct vehicle configuration from the central server, ensuring a proper, tamper-free install.

Technical Specifications

• Part Number: DK62-14F041-AC (cross-compatible with AK, AD, AE suffixes depending on vehicle spec; always confirm your original label)
• Memory: SPI EEPROM, completely erased and checksum verified
• Communication Protocols: CAN-bus (HS/LS), LIN for local loads
• Post-service Tests: Full pin-level bench test on simulated network; all outputs (lights, locks, wipers, alarm) activated and monitored
• Condition: OEM housing, thoroughly cleaned, with fresh anti-static packaging

Vehicle Fitment

This BCM covers a broad range of later JLR models. Confirm your original part number matches before ordering. Typical applications include:

• Range Rover Evoque (L538) 2015 – 2019
• Discovery Sport (L550) 2014 – 2019
• Jaguar E-Pace (X540) 2017 – 2019
• Some Land Rover Velar (L560) 2017 – 2019 variants
• Select Jaguar XE and XF models (check label)

For definitive fitment, send us your VIN or call us—we provide immediate confirmation.

Programming Procedure

1. Fit the virginized BCM in place of the faulty unit.
2. Connect a supported JLR diagnostic device (Mongoose Pro, genuine JLR VCI, or compatible interface).
3. Open the official JLR diagnostic software (SDD for earlier models, Pathfinder for 2017+).
4. Establish communication and perform a vehicle scan.
5. Select the “Immobilization” or “PMI – Programmable Module Installation” function.
6. The software recognizes the blank module and prompts you to enter the VIN.
7. The tool pulls the car’s original As-Built data and writes it to the BCM.
8. Complete key synchronisation, clear DTCs, and test all functions.

The entire session takes around 25–40 minutes and requires no soldering or EEPROM programming equipment.

Why This Module Makes Sense

• Zero residual data—we triple-verify every memory address
• No manual EEPROM editing, no risk of checksum failure
• Plugs straight in and follows factory programming protocol
• We test lighting, locking, wiping, and alarm circuits thoroughly
• Saves hours of labor and reflashing attempts
• Works with both SDD and Pathfinder software
• 12-month warranty with full UK-based technical support

Why SX-CAN.com?

We focus only on JLR electronics, and that specialisation shows in every module we ship. Our engineers understand the specific bootloaders and EEPROM layouts across model years. Before packing, each DK62-14F041-AC undergoes a live bench test that simulates real vehicle commands and monitors the module’s responses. You don’t just buy a part; you receive a solution that helps you complete the job fast and without comebacks.

Frequently Asked Questions

Q: Do I need to transfer any components from my old BCM?
A: No, this is a complete direct-replacement unit. Keep your old module for reference only.

Q: What if my diagnostic software fails to programme it?
A: Our bench tests guarantee the module responds correctly. In the rare event of an issue, our technical support team will walk you through the exact steps. We also back the product with a replacement warranty if a genuine hardware fault exists.

Q: Can you supply this module pre-programmed with my VIN?
A: We specialise in virginized modules to give you full control. However, we can offer pre-programming as a separate service—contact us for details.

Ready to Fix Your JLR?

Add the JLR BCM Module DK62-14F041-AC Virginized EEPROM to your basket, and enjoy a smooth, dealership-quality repair at a much lower cost. We ship same-day from the UK with full tracking. For trade accounts or bulk orders, reach out to our sales team directly.