JLR KVM Module FK72-19H440-BF Virginized EEPROM

Your JLR vehicle suddenly refuses to detect the smart key. The keyless entry stays dead and the engine will not crank. The root cause often lies inside the Keyless Vehicle Module — a corrupted EEPROM data set that breaks communication. SX-CAN provides the precise virginized EEPROM file for the FK72-19H440-BF module, returning it to a factory‑fresh state that guarantees a clean, error‑free programming session.

The KVM serves as the central controller for passive entry, push‑button start, and immobiliser authentication. When the stored data degrades, the entire vehicle security chain collapses. Installing a replacement module costs hundreds and still requires expensive dealer coding. Our virgin file delivers a fast, reliable, and far more affordable path to success.

Key Features of This Virginized EEPROM File

• We source the data directly from a genuine, never‑coded OEM module, ensuring 100% integrity and zero hidden remnants.
• Our engineers manually validate and correct all checksums, security handshakes, and configuration bytes before releasing any file.
• You receive a ready‑to‑flash .BIN file that works immediately with VVDI Prog, Orange5, Xprog, UPA, and many other popular programmers.
• Instant download after payment lets you start the repair within seconds — no physical shipping, no waiting.
• Lifetime technical support from dedicated JLR electronics experts who understand your practical challenges.
• Regular data updates whenever we identify improved starting points or new hardware revisions.

Technical Specifications

KVM Part Number: FK72-19H440-BF

EEPROM Chip: Typically 95128 or 25128 (SOIC‑8 package). Always verify your chip marking to select the correct file variant.

Data Size: 16 KB (16384 bytes)

Vehicle Compatibility: This module appears in various Land Rover and Jaguar models equipped with passive keyless entry, including Range Rover, Range Rover Sport, Discovery 4, and others. Exact compatibility depends on the part number printed on your unit; cross‑check that number before ordering.

Why Trust SX-CAN for KVM Repair?

SX-CAN specialises exclusively in JLR module data restoration. We never resell unverified dumps collected from unknown sources. Every virgin file passes bench simulation and in‑vehicle validation before it reaches you. That rigorous approach yields a success rate exceeding 99% on the first attempt, because you work with data that is genuinely correct and complete.

In contrast, incorrect dumps frequently cause permanent module lock‑ups that even a main dealer cannot reverse. When you choose SX‑CAN, you eliminate that risk entirely and protect your workshop reputation.

Our technical team responds rapidly to any query about programmer settings, chip identification, or module learning procedures. We stand beside you until the vehicle leaves the bay fully functional.

Step‑by‑Step Installation Guide

1. Locate and remove the KVM from the vehicle. It typically sits behind the glovebox, beneath a front seat, or inside the rear quarter trim.
2. Open the module enclosure carefully and identify the serial EEPROM on the circuit board.
3. Connect your programmer (via clip or after desoldering) and read the original chip contents. Save this backup file permanently.
4. Erase the chip completely, then load the SX‑CAN virgin file and write it to the EEPROM.
5. Read back the chip contents and compare the checksums against our supplied reference to confirm a flawless write.
6. Reassemble the module, reinstall it in the vehicle, and connect a JLR‑approved diagnostic tool (SDD/Pathfinder or equivalent).
7. Run the “Program New Module – KVM” routine, learn the smart keys, and synchronise the immobiliser according to the on‑screen prompts.
8. Test keyless entry, passive start, and lock/unlock functions to verify full system restoration.

Because our virgin file presents the module as brand‑new, the diagnostic tool accepts it readily and completes the programming sequence without interruption. You save many hours of troubleshooting and avoid costly repeat attempts.

Package Details

Your order includes one virginized EEPROM file designated for the FK72-19H440-BF KVM. After payment confirmation, you gain an immediate direct download link. No physical goods ship — you own the digital data permanently and can re‑use it for future repairs.

Need a Different KVM Variant?

If your module carries a part number other than FK72-19H440‑BF, simply send us a clear photograph of the label and the EEPROM chip. Our engineers will supply or produce the exact virgin file for your specific hardware. Our library covers the vast majority of JLR KVM variants, so you can always rely on SX‑CAN for the right data.

Order the FK72-19H440‑BF virgin file now and restore complete keyless security functionality to your customer’s JLR with speed, certainty, and confidence.