JLR BCM Module DK62-14F041-AD Virginized EEPROM

At SX-CAN.com, we supply a fully functional Body Control Module (BCM) for Jaguar Land Rover vehicles –
part number DK62-14F041-AD. Our engineers professionally virginize the onboard EEPROM,
returning the unit to its original, factory‑fresh state. You receive a plug‑and‑program module that
eliminates the need for security hacks, dealer tool restrictions or expensive coding sessions.

Why You Need a Virginized BCM

Standard used BCMs carry locked immobiliser data and a permanent VIN from a previous vehicle. A virginized
EEPROM removes these barriers completely. You can write your own VIN, synchronise keys and configure
vehicle options with standard JLR diagnostic software. This approach slashes programming time and
guarantees a clean, error‑free adaption.

• No stored VIN, mileage or security codes
• Blank immobiliser/secure element ready for fresh pairing
• Zero risk of VIN mismatch or configuration conflicts
• Speeds up replacement compared to non‑virginized alternatives

Technical Specifications

• Part Number: DK62-14F041-AD
• Module Function: Body Control Module / Central Junction Box
• EEPROM Status: Virgin (fully erased, checksum‑verified, bench‑tested)
• Communication: High‑speed and mid‑speed CAN‑Bus
• Connector Pin Count: Multiple connectors (please consult your vehicle diagrams)
• Condition: Used, fully refurbished and 100% functional
• Warranty: 12 months from date of purchase

Our Virginization Process

We connect each BCM to a dedicated bench programmer and write a clean data set that erases all previous
vehicle‑specific parameters. After the write, our technicians perform a three‑stage validation:

• Checksum verification across every EEPROM partition
• CAN‑bus response test on simulated HS and MS networks
• Bootloader and application firmware self‑test

You receive a module that behaves precisely like a factory‑fresh component. Our meticulous approach delivers
a 100% first‑time programming success rate for customers worldwide.

Programming and Installation

You need a JLR‑compatible diagnostic interface (such as Mongoose Pro or VXDIAG) and the appropriate software –
either SDD (Symptom Driven Diagnostics) or Pathfinder. After you physically install the BCM, follow these steps:

1. Connect the diagnostic tool and establish communication with the new module.
2. Run the “Immobiliser – Replace BCM/ECM” routine to write your VIN.
3. Learn the vehicle keys and synchronise the immobiliser data.
4. Configure body options (central locking, lighting, windows) according to the build specification.

We include a basic programming guide with every order. Our support team also stands ready to help you through the
process if any questions arise.

Compatible Vehicles

This BCM fits numerous Jaguar Land Rover models manufactured from 2011 onward. You must always confirm the part
number DK62-14F041-AD on your original module. Common platforms include:

• Range Rover Evoque (L538) 2011 – 2018
• Land Rover Discovery Sport (L550) 2015 – 2019
• Jaguar E‑Pace (X540) 2017 onward
• Land Rover Freelander 2 (L359) with applicable options
• Select Range Rover (L405) and Range Rover Sport (L494) variants

If you provide your VIN before ordering, we verify 100% compatibility at no extra charge.

Common Signs Your BCM Needs Replacement

You may experience one or more of these symptoms when the body control module fails:

• Central locking works intermittently or stops completely
• Electric windows and mirrors become unresponsive
• Exterior lights (headlights, turn signals, brake lights) malfunction
• Wipers operate erratically
• Immobiliser warning lamp stays lit and the engine does not start
• Multiple CAN communication fault codes appear in other modules

Installing our virginized BCM resolves these faults and restores complete body electronics operation.

Why Buy From SX-CAN.com

SX-CAN.com specialises in refurbished automotive electronics with a sharp focus on JLR vehicle networks.
When you choose us, you gain:

• Deep technical expertise: Our engineers understand all JLR CAN architectures.
• Rigorous testing: We test every module on emulated and, where possible, real vehicles.
• Global shipping: We dispatch quickly and use well‑protected packaging.
• Dedicated support: You can reach our team via email or phone for hands‑on guidance.
• Secure transactions: Our website protects your payment data with industry‑standard encryption.

Order Your DK62-14F041-AD BCM Today

Add this virginized module to your cart now – we keep ready‑to‑ship stock. If you require a different part number
or want us to virginize your existing BCM, contact us for a tailored service quote. Restore your Jaguar Land Rover’s
comfort and safety features quickly with a dependable BCM from SX-CAN.com.